Broadband Hamnet (BBHN) at HOTARC

List of our current mesh links (real time)

Mesh nodes in McLennan County

(Click map for live version with Key to symbols)

Map a profile of the signal path between two antennas
(See suggested tips below under "HeyWhatsThat" link.)
typical linksys router

NEW FIRMWARE FOR UBQUITI DEVICES RELEASED!!!

See the Official Release document, but in a nutshell, we can now use something other than reflashed Linksys routers. We can use a line of MUCH MORE POWERFUL Ubiquiti 2.4 GHz devices, replacing the stock firmware with newly released mesh firmware. The cost for meshing with Ubiquiti gear with its own antennas is not substantially greater than LinkSys gear plus antennas. Stay tuned and watch us grow as we upgrade our mesh here in McLennan County with the new, more powerful devices.

The now-supported 2.4 GHz Ubiquiti equipment:

Our favorite! Nice price, and a real performer!
Note: Support for other bands (900 MHz, 3 GHz, 5 GHz) was added with the latest version: v1.1! Watch this how-to video:
Video: Flashing a Ubiquiti device: from our server   from YouTube
array at new Hillcrest Hospital
position of array on hospital rooftop
HOTARC members—node by node—are extending and solidifying the reach of our mesh across McLennan County. Recently we have installed several nodes on tall buldings, and are transitioning to the more powerful Ubiquiti equipment. For example, AE5CA-QTH is using a Rocket M2 and airMAX sector antenna to solidly connect with nodes 8 miles and 13 miles distant! Wow! Others are using a Nanostation M2 with outstanding results, e.g., reaching 10 miles! Just remember: a "line of sight" between stations is almost essential at these frequencies. The moisture in a single tree can block your signal.

What is Broadband Hamnet (previously known as HSMM-Mesh)? Simply, it's hams using our radio privileges to operate a private wi-fi computer network. Applying our ham skills and capabilities, we can often span a whole county and more! But we do more than just surf the web. We can communicate with this network! By reprogramming inexpensive wi-fi equipment and operating within our amateur license privileges, we can boost power, supplement the antennas, and construct a robust computerized communication network among fellow hams. The map above shows the overall status of some HOTARC hams who are making this work. The more nodes we get on the air, the easier it will be for everyone to connect...and communicate! And just ask anyone who's dipped their toe into the water: it is fun!!

Want to join the excitement? Especially if you live nearby one of the pins on the map, contact us to find out how you can get on board. And be on the lookout for old, sometimes FREE, LinkSys routers—see "shopping list" below for Hamnet-capable models—from friends/family/garage sales and closets. Or consider purchasing more powerful Ubiquiti models (listed above). We now have several stations that have assorted applications working (see below), and we're expecting more in the weeks and months to come!

Possible Uses of Hamnet Mesh
Success!   Application
Video (e.g., webcams)
Phone (VoIP)
File transfer (FTP)
Chat
Email
Screen mirroring
Web server (e.g., WX station)
Map server
(and more coming!)
LinkSys Routers: Quick Shopping List
(Only these models will work for Hamnet Mesh.)
Model Version RAM/Flash Serial Nos. Prefix
WRT54GS 1.0 - 3.0 32/8 MB* CGN,CGN1,...CGN5
WRT54GS
WRT54G
WRT54GL
4.0
2.0−4.0
1.0−1.1
16/4 MB CGN6
CDF2,CDF3,...CDFA
CL7A,...CL7C, & CF7C
WRT54G 1.0 16/4 MB
(5VDC only!)
CDF, CDF1
*Best!     Note: Find model and serial nos. on underside of the unit.
See complete shopping guide (pdf).

Amateur Radio Guidelines for 2.4 GHz

  • As always, we must operate under FCC Part 97 rules and regulations. 24dbi parabolic dish
  • Note our frequency allocations in the 13 cm band: 2390-2450 MHz, which includes a 802.11b/g/n router's channels 1 thru 6 (but not channels 7 thru 11). (Ref Part 97.301)
  • Not constrained by the Part 15 power limitations, we can use amplifiers and gain antennas. That means we can connect much farther than typical home and neighborhood wifi systems. (Ref Part 97.313)
  • The SSID (included with every transmission) should include your callsign—an easy way to satisfy our ID requirement. Common practice is to append a few additional identifying characters (e.g., AC5CV-QTH).
  • Encryption is NOT currently permitted. (We're working on that.) So be careful about sending sensitive or confidential information over the mesh. (Ref Part 97.113(a)(4))
  • Per the well-known Part 97.113 section: no music, no profanity, no business activity, and so forth. So, Internet access over our mesh needs to be closely controlled. (Ref Part 97.113)
  • Only licensed amateur radio operators should use Part 97 hardware. So, as with all your ham radio gear, take steps (e.g., passwords) to prevent unauthorized users.
  • Safety First! These are microwave frequencies—same as your kitchen microwave oven! Keep gain antennas aimed above people!

See also our ATV page, documenting our past involvement and work with Amateur Television. The Hamnet bands are able to carry live video and might revive interest in ATV, which remains a very useful capability for amateur radio operators.

Links

Microwave Signal Calculator (Excel spreadsheet)

Official Hamnet web site (font of wisdom and updates for Broadband Hamnet)

Step-by-step (how to flash your LinkSys router for Hamnet)

Demonstration video (how to flash an Ubiquiti device for Hamnet)

Name That Connector!
(or "How to Order the Right One!")

RF connectors--click to enlarge image.
(Click to enlarge image.)

Software downloads (for supported hardware)

Mesh node web pages   (PDF) (what's included in the Web interface)

Password reset (how to use "Failsafe mode")

Parabolic dish antenna (24 dbi) (Hint: consider "used")

Fleeman, Anderson, & Bird (cables, antennas, POE, etc.)

ISP Supplies (wi-fi antennas, etc. in College Station, TX)

Build a Patch Antenna for 2.4 GHz (~8 dbi)

Build a Cantenna for 2.4 GHz (~10 dbi)

Build a Bi-Quad Antenna for 2.4 GHz (~11 dbi) (or to feed a dish)

W1GHZ Microwave Antenna Book (LOTS of technical info!)

HeyWhatsThat Signal Profiler (terrain calculator)

1) Drag lower right corner of map to enlarge it.
2) Enter locations (or click/drag "+" symbols on the map). The lat/lon/altitude values can be helpful.
3) Click altitude link for each entry, and enter added antenna height above ground, e.g., +30.
4) Click "Parameters" below the profile image. Enter your Frequency (e.g., 2400).
5) View path profile (clear or blocked), and bearing/range to second station.
6) Click "Clear" or "Backspace" (links) to remove/change locations.
Tip: Use Satellite view to see obstructions.

Adding a secure shell login (SSH) (by AE5CA)

Real-time Mesh Topology Report Summary of the HOTARC mesh (by AC5CV)

dBm to Watt Conversion Table
dBm Watts   dBm Watts   dBm Watts
0 1.0 mW   16 40 mW   32 1.6 W
1 1.3 mW   17 50 mW   33 2.0 W
2 1.6 mW   18 63 mW   34 2.5 W
3 2.0 mW   19 79 mW   35 3.2 W
4 2.5 mW   20 100 mW   36 4.0 W
5 3.2 mW   21 126 mW   37 5.0 W
6 4 mW   22 158 mW   38 6.3 W
7 5 mW   23 200 mW   39 8.0 W
8 6 mW   24 250 mW   40 10 W
9 8 mW   25 316 mW   41 13 W
10 10 mW   26 398 mW   42 16 W
11 13 mW   27 500 mW   43 20 W
12 16 mW   28 630 mW   44 25 W
13 20 mW   29 800 mW   45 32 W
14 25 mW   30 1.0 W   46 40 W
15 32 mW   31 1.3 W   47 50 W

Articles to Read

QST July 2013 pg 68-69 (HSMM in a special event)

Intro to HSMM (2004) (by John Beadles N5OOM)

HSMM Background by KB9MWR   by W5VWP

Multipath and Diversity Mode (Cisco article)

Antenna Basics (easy and informative read)

Parabolic Dish Antenna Theory (by Paul Wade N1BWT)

Offset Dish Antenna Theory and
Specs for various brands (by Paul Wade N1BWT)

Patch Antenna Design (how-to)

Rootenna Design (how to)

Horizontally Polarized Omni Antenna (how to)

See Your Mesh Node Over the Internet (or Home Network) (step-by-step configuration of your node and home router)
   A Fix for Windows Devices: Instructions by Microsoft    Registry Merge file

Linking HSMM-Mesh into Your Home Network (lots of details by Ohio Packet)

Transform Old Router into a Wi-Fi Repeater (a great use for a router NOT in the above list!)

1. Check the Router Database (type your router model) to see if it can be flashed with DD-WRT. If so, click links to specific instructions and DD-WRT firmware file.
2. Install DD-WRT (general instructions): Web page article  or  pdf version
3. Turn it into a Wi-Fi Repeater: Set Up As a Repeater Bridge (step-by-step from the DD-WRT wiki)

Peek into a Ubiquiti Nanostation (photos under the hood)

FAQ on Wireless Networking (Straight-shooting info from WLAN Antennas, a commerical installer)


Contact us: